Factory wholesale Stainless Nameplate - PET,Plates with logo,Panel for game machine | CHINA MARK – Weihua

PET,Plates with logo

Polyester is commonly known as polyethylene terephthalate, or PET for short.The density is generally between 1.38 and 1.41g/cm.

PET film was originally used as an insulating material in electrical products. In the nameplate, except for the membrane switch, EL film was used as the carrier of circuit and conductive film. At first, PET film was rarely used in the nameplate's signage and panel.The reason is that although PET is produced by many manufacturers, the surface of PET usually lacks the change of texture and is usually transparent or foggy.The surface roughness cannot meet the requirements of the nameplate;Surface polarity is not easy to and general ink affinity.

However, many superior properties of PET, such as good insulation and heat resistance, high mechanical strength, transparency and air tightness, especially the chemical stability of PET to a variety of chemicals, as well as its folding resistance and high elasticity, are beyond the reach of other plastic membranes.

For this reason, in the nameplate applications where there are special requirements on its performance, the target is constantly turned to PET.At the same time, due to the improvement of the surface state of PET film, as well as the continuous popularity of special inks, the application of UV ink to PET excellent performance has created conditions, at present, in the nameplate industry has been more and more focused on the requirements and selection of PET film.

PET panel,PC nameplate, fine film products, film key panel, years of experience, over a long service life, quality assurance, domestic and international certification, choice for China, trustworthy, more than 10 years of experience, reasonable price.

You may also like:panel for remote controller;Please click to view ~

If you are interested in getting in touch with a our sales rep click here

The main process shows as below

Step 1:Alum plate

Step 2:Every kind of colored paint

Step 3:Dust-free printing workshop

Step 4:Print each kind of graphics

Step 5:Industry oven, hi-temp, low-temp, constant temp

Step 6:Professional inspector and packaging workers

“Our 40,000 square meters facility has the capabilities to meet all your extrusion aluminum, logo plates,precision stamping needs coupled with multiple fabrication options to produce high-quality products solutions. ”

― WEIHUA