| Machines | Alum extrusion machine |
| Processing | - Alum sheet+Stamped+Sandblasting Anodized.- further combined with the polishing/sand-blasting/graining to get the surface finish.
- to get the protective layer by anodic oxide coating. - to get the logo by laser engraving. |
| Application | Notebook metal case products |
| NW | 200g |
| Mold | Stamping mold |
| Mold open cycle | 12 days |
| Type | OEM Parts |
| Mass production Lead time | 4weeks |
Precision metal stamping, focus on metal mold manufacturing and processing, more than 10 years of metal mold stamping processing experience, equipped with sophisticated pneumatic punch, metal mold manufacturing equipment, good quality, reasonable price, has thousands of customers choose to cooperate and trust, welcome you to consult ~
1. Before starting work, the operator shall check and tidy up the press and the working place:
Check the precision terminal die is clean;
Check the fastening condition of the die and the fixing condition on the press;
Check the thickness of the material and the cleanliness of the surface;
Check the lubrication condition of the press and prepare the waste tank. At the same time, put the precision stamping parts and precision terminal blank in the designated position for easy access.
2, when working, should always comply with the safety regulations.
In case of stamping, all safety regulations stipulated shall be implemented at all times;Work to put on work clothes, wear a good working cap, work to be serious, always adhere to the post, thought to concentrate.
3, strictly according to the precision stamping parts, precision terminal process procedures stipulated by the operation of the contents
The first part of precision stamping shall be inspected and qualified before production. In the process of stamping, it shall be carried out self-inspection and special inspection at any time.
When the precision stamping failure occurs, should stop immediately, timely report to the relevant departments, after the recovery of normal, can start production.
“Our 40,000 square meters facility has the capabilities to meet all your extrusion aluminum, logo plates,precision stamping needs coupled with multiple fabrication options to produce high-quality products solutions. ”